Dremel 1100-01 Stylus 5,000 to 25,000 RPM Variable Speed 7.2-Volt Lithium-Ion Cordless Rotary Tool with Docking Station

Dremel 1100-01 Stylus 5,000 to 25,000 RPM Variable Speed 7.2-Volt Lithium-Ion Cordless Rotary Tool with Docking Station Features

Additional Dremel 1100-01 Stylus 5,000 to 25,000 RPM Variable Speed 7.2-Volt Lithium-Ion Cordless Rotary Tool with Docking Station Information

What's in the Box
Stylus tool, docking station, one #191 high speed cutter, one #194 high speed cutter, one #106 engraving cutter, one #7144 diamond wheel point, one #84922 silicone carbide Grinding Stone, one #403 bristle brush, two #414 polishing felt wheels, two #429 polishing felt wheels, one #425 emery impregnated wheel, one #421 polishing compound, one #512 abrasive buff, one #430 sanding band, two #438 sanding bands, five #412 sanding discs, one #401 mandrel, one #402 mandrel, one 3/32-inch collet, wrench, case

What Customers Say About Dremel 1100-01 Stylus 5,000 to 25,000 RPM Variable Speed 7.2-Volt Lithium-Ion Cordless Rotary Tool with Docking Station:

i cannot get the collet to turn AT ALL in either direction when it's in the locked position. am i doing something wrong. i just purchased the dremel stylus and CANNOT get the collet to open to put in the accessories. can anyone please help. did anyone else have the same problem. nor can i remove it. it says to move the switch into the locked position and then turn it counter-clockwise.

First time I used it, I worked for literally HOURS before the appliance became hot and eventually turned itself off briefly. I have small hands, yet this appliance was easy to use and manuever. This product is everything I hoped it would be. However, by then vitually all of my work was finished. I read other reviews before buying, some good, some not so -- but I would highly recommend this product and confidently stand by my recommendation. I purchased it for jewelry making, specifically for drilling holes in natural shell. It works great, making small, precise holes without shattering or splitting the delicate shells.

That's annoying (hence the 4 stars instead of 5).* CHARGE TIME: Only the heaviest users will notice, but this unit's charger needs 3 hours to fully charge the stylus. For a cordless stylus, that's all out torture, but it gets it done - although it does get pretty warm under that kind of abuse.* COMFORT: This unit fits nicely in the hand, and is ambidexterous.THE QUIRKS:* CHARGE SENSOR: Under extremely heavy use (see above), the stylus gets warm. It works. Clearly, its smart charging technology is not very smart.

I just bought one of these. My new Li-Ion Makita drill charges in only 15 mins, so 3 hrs for something far smaller seems rather pokey. NITS:* DEFAULT ACCESSORIES: The default kit is stingy on attachments - and some of the attachments it does comes with can't be used out of the box unless you buy additional parts. So far, I've only used the etching and cutting head, but overall I'm pleased with it.THE GOOD:* POWER: The run time and torque are impressive.

Anyway, one way around that is to pop the stylus in the freezer for 10 mins (to speed-cool), and THEN put it in the charger. I also wish this thing had a detacheable battery pack, so that you could swap packs while the other re-charges - and not have to toss out the whole unit when the built-in battery finally dies.Recommended, despite a few quirks. using the cutting wheel on max speed, I'm able to saw through just over 2 dozen #10 steel screws, at about 10 sec apiece (and plenty of showering sparks), before the battery runs down. When placed into the charger while still warm, the charger appears to get confused and think the unit has just been charged - and refuses to charge it further.

The only thing I can say needs a bit more work is the cradle/docking station. Point made). I have very little use for it any more.

Although there is a light on the back of the dock that tells you when it's in place, I'm never sure whether it's completely locked into the dock, and you can never be sure that it will stay that way once you leave the room. It's still a great product. (Indeed, when I went to check on the light just now, I discovered that it had worked its way out of position somehow and was not charging until I twisted it slightly.

I have been so pleased with this little stylus that I'm about ready to give away my corded Dremel tool. Also, the unit doesn't dock with the charging plug as convincingly as I would like. I like it well enough that I gave a similar unit to my brother and his wife last Christmas and last I heard, they were equally thrilled with it.

The lithium battery holds an extremely long charge and the tool is strong enough to accomplish nearly any task in one charge. First, it's a bit light and slides around wherever it's placed.

So after using this tool just once, it sits here, with the brush tool in place, worthless unless I want to brush something else. But the shaft lock button did, and a small spring popped out to God knows where. Sitting next to it is the 150 tool"All-Purpose Accessory Kit." This product, made in Mexico, should be declared an illegal immigrant and kicked back over the border. It worked fine--once. While trying to remove the brush tool, the colletnut was so tight it wouldn't come off.